Ladder elevators can be a nice addition to the home to enhance accessibility. If the home has relatives or friends who are not able to move about the stairs easily, stair lifts are a good choice for this purpose. These days, it is extremely easy to install stair lifts and here are a few tips to get started.
Many Advantages
These days, installing stair lifts in the home is an easy task and with it comes the pride and assurance that the home is accessible for everyone. Even persons with lesser degree of mobility will be able to navigate the home at their leisure and comfort levels.
Screwdriver Kit
Easy Installation
Once the most appropriate stair lift has been chosen and, which fits the width of the stairs, installation is needed. Many people get intimidated by the installation process but the fact is that it is very easy. The only tools you need are a hammer, screwdriver, level and the kit. It is very important to consult with the owner's manual in the kit before starting the installation but in general the basic installation steps are quite generic.
Three Carriers
The stair lifts typically come with three carriers namely one going on the top of stairs, one at the bottom and one at the middle.
Cable
Typically, the stair lifts come along with cables, which allow the lift to come back to the ladder bottom once it reaches the top of the stair. This is a special kind of power cord, right through the ring, placed against the wall and runs from the top to the bottom of the stair lift.
Installing And Seat Path
The next stage is the actual installation as well as placing the seat path to the track. The seat needs to be attached in between two tracks, which were available with the kit. The top of this seat should be attached to the top of the track and proper screws should be fastened to hold the seat in place. Then, the track combination should be set appropriately to connect brackets, which attach to the steps of the stairway. The track needs to be in level so the seat is not in a blocked position. Once the ladder path is set, the elevator screw of the ladder is placed into the track with the appropriate screws.
Pulley
The ladder stair lift comes equipped with a pulley, which helps move the chair down and up across the stairway. The chain should be installed at the middle of the runway right at the center. You need to slide the pulley in forward as well as backward directions with ease.
Cord
The cord is critical to successful installation of the stair lift because it powers the elevator. This power cord has to be fed through a specific slot inside the track, which is specifically designed for this cable. Once the cord is fed through, the power cord needs to be connected to the ramp bottom and then to the outlet.
Special Price!!! Anytime Tools 32 pc MICRO PRECISION SCREWDRIVER SET w/ T4 T5 T6 Mini Torx, Hex, Flat, Pozi
Oct 20, 2011 04:18:34
Click for larger image and other views

Anytime Tools 32 pc MICRO PRECISION SCREWDRIVER SET w/ T4 T5 T6 Mini Torx, Hex, Flat, Pozi Feature
- 9 pc Torx T4, T5, T6, T7, T8, T9, T10, T15, T20
- 7 pc Flat 1.0, 1.5, 2.0, 2.5, 3.0, 4.0 mm
- 4 pc Phillips 000, 00, 0, 1
- 2 pc POZI #0, #1
- 8 pc HEX 1.27, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
Anytime Tools 32 pc MICRO PRECISION SCREWDRIVER SET w/ T4 T5 T6 Mini Torx, Hex, Flat, Pozi Overview
THIS IS THE MOST COMPLETE SET FOR THE TINKERER
A versatile set for driving and retrieving very small screws. Includes a handle, extendable shaft and drivers in tiny sizes (see list below). Fingertip swivel gives you outstanding control. You can adjust the length of the driver shaft to match the needs of various applications. SUPER QUALITY!
Use on CAMERAS, COMPUTERS, TELEPHONES, PDAs and most small electronics.
The set includes these bits:
- 9 pc Torx T4, T5, T6, T7, T8, T9, T10, T15, T20
- 7 pc Flat 1.0, 1.5, 2.0, 2.5, 3.0, 4.0 mm
- 4 pc Phillips 000, 00, 0, 1
- 2 pc POZI #0, #1
- 8 pc HEX 1.27, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
SAVE NOW on the special offers below!
Available In Stock. |
This Anytime Tools 32 pc MICRO PRECISION SCREWDRIVER SET w/ T4 T5 T6 Mini Torx, Hex, Flat, Pozi ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
